Author : Cook Nick
Title : Do-It-Yourself Colloidal Silver Generator Plans
Year : *
Link download : Do-It-Yourself_Colloidal_Silver_Generator_Plans.zip
Directions for Making Your own CS Generator : How to make your own Silver Colloid Generator While it has been discovered that 30 volts is the ideal for Silver Colloid production, 27 volts is very effective and happens to be the convenient result of wiring three 9-volt batteries together. Therefore, you'll need three 9-volt transistor radio batteries, three battery snap-on lead connectors, 2 insulated alligator clips, 1 24 volt 40 mA sub miniature incandescent bulb (28 volt 40 mA will also do fine), a foot of 3/32" heat shrink insulation tubing, a foot of 2-conductor stranded insulated zipper wire for clipleads, a small box to put it all in, and 10" of pure silver wire (.999 fine). This should cost under $30.00 for everything. Assuming some skill with a soldering iron, you should spend about thirty minutes constructing the generator. Solder your three snap-on battery clips in series (red to black) to provide 27 volts. Connect a 24V incandescent lamp in series with either positive or negative output lead. Solder the red insulated alligator clip to the positive (anode) and the black insulated clip to the negative (cathode) 2 conductor lead wires. Insulation is shrunk over soldered connections using a heat gun or hair dryer. ...
Festy Danièle - Mes petites recettes magiques aux huiles essentielles
Auteur : Festy Danièle Ouvrage : Mes petites recettes magiques aux huiles essentielles Tous les...